MR-JE-40B Mitsubishi Brand Servo Amplifier Fast Delivery
Product Type : Digital AC-Servo Amplifier MR-JE, for Rated Motor Power up to 400 W, SSCNETIII/H
The MR-JE-_B servo amplifier is connected to controllers, including a servo system controller, on the highspeed synchronous network SSCNET III/H. The servo amplifier directly receives a command from a controller to drive a servo motor.
SSCNET III/H achieves high-speed communication of 150 Mbps full duplex with high noise tolerance due to the SSCNET III optical cables. Large amounts of data can be exchanged in real-time between the controller and the servo amplifier. Servo monitor information can be stored in the upper information system and used for control.
With one-touch tuning and real-time auto tuning, you can easily and automatically adjust the servo gains according to the machine.
The tough drive function, drive recorder function, and preventive maintenance support function strongly support machine maintenance.
The servo amplifier has a USB communication interface. Therefore, you can connect the servo amplifier to the personal computer with MR Configurator2 installed to perform the parameter setting, test operation, gain adjustment, and others.
The servo motor equipped with an absolute position encoder whose resolution is 131072 pulses/rev will enable a high-accuracy positioning.
|3-phase 170 V AC
|3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
|Rated current (Note 1) [A]
|Permissible voltage fluctuation
|3-phase or 1-phase 170 V AC to 264 V AC
|Sine-wave PWM control, current control method
|SSCNET III/H communication cycle (Note 3)
|0.444 ms, 0.888 ms
|USB: Connection to a personal computer or others (MR Configurator2-compatible)
|Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, and error excessive protection
Changsha Zhinian Automation Equipment Co., Ltd., has been a reliable retailer specializing in famousbrand industrial automation products for more than a decade. With its headquarter located in Changsha, the capital city of Hunan province, we set up branches and warehouse in Dongguan city in Guangdong province for sake of convenient delivery.
Our company mainly deal with advanced automation products which are sounding brand 100% original new, such as Programmable Logic Controllers , Human Machine Interface, Servo motor,Sensor,Encoder, Inverter, Servo drive, Battery, Cable ,Relay Switch of Mitsubishi, Omron, Proface,Fuji,Siemens and so on.
We are fully responsible to all of our products and strictly control the product quality. We focus on befor-e after sales service, consult, quality guarantee, training base on customer benefit and satisfy.