Home
>
products
>
Omron PLC NX
>
|
|
| Place of Origin | China/Japan |
| Brand Name | Omron |
| Model Number | NX-OD5121 |
Omron PLC I/O Module NX-OD5121
Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP coupler
| Number of output points | 16 | Output format | [Other] IKOU |
|---|---|---|---|
| Connection terminal | [Connector] m0005 | Representative standards | CE / UL / CUL / CSA |
| Output voltage(V) | 12 to 24 DC | Output current(A) | 0.5 |
| Consumed current(A) | 30 mA or less | Name | Digital Output Unit |
| I/O Refresh Method | Switch between free-run and synchronous I/O | ON/OFF Response Time | 0.1 ms or less / 0.8 ms or less |
| Short-circuit protection | - | - | - |
| Representative standards | CE / UL / CUL / CSA | Name | Digital Output Unit |
|---|
CONTACT US AT ANY TIME
