Home
>
products
>
Omron PLC NX
>
|
| Place of Origin | China/Japan |
| Brand Name | Omron |
| Model Number | NX1P2-1040DT |
NX1P2-1040DT Omron NX Seriers CPU Unit 40 Built-in I/O Pnts 6 Max Axes 2Motion Control Axes NPN
Descriptions
Descriptions of Omron NX1P2-1040DT
NX Seriers CPU Unit; 40 Built-in I/O pnts; 6 Max axes; 2Motion control axes; NPN
CPU - Central Processing Units NX1P 40IO 2Coord+4PTP Axes NPN
Motion control axes, 2 Axes, 40 Built-In I/O (24 Inputs, 16 Outputs), DC Inputs, NPN Transistor Outputs
NX1P 40IO 2COORD4PTP AXES NPN NX1P21040DT
Sysmac NX1P CPU with 40 Digital Transistor I/O (NPN) 1.5 MB memory EtherCAT (2 servo axes 4 PTP axes 16 EtherCAT nodes) EtherNet/IP and 2 serial option ports
| Type | Central Processing Unit (CPU) |
| Mounting Type | DIN Rail |
| Program Capacity | 1.5 MB |
| Dependencies | NX-Coupler-Interface, NX-Coupler-Accessories, NX-Digital-IO, NX-Analog-IO, NX-Safety, NX-Safety-IO,NX-Temp-Input, NX-Motion-IO, NX-Serial-Communications, NX-Load-Cell, NX-Heater Burnout, NX-Encoder-Input, NX-SSI-Input, NX-Pulse-Output, NX IO-Link, GX, ETHRHDW1, ETHRHDW2, E3X-ECT, NX1WOPTN |
| Accessories | SSSW, SSSWLT, HMC-SD291 |
| Spare Parts | CJ1W-BAT01 |
| Special Function | NX Local Bus |
| Input/Output (I/O) | 296 Points Local (808 with NX Coupler) |
| Number of Units [Max] | 8 Local IO Units; 24 total per CPU |
| Number of Axes | 6 |
| Flash Memory Port | Secure Digital (SD) |
| Communications | EtherCAT and EtherNet/IP Built-In |
| Motion Control Network | EtherCAT |
| Cycle Time [Min] | 2 ms |
| Programming Connection | Ethernet |
| Programming Language | Ladder, Structured Text, Function Block |
| Height | 100 mm |
| Width | 148 mm |
| Depth | 71 mm |
| Weight | 650 g |
| GX-JC03 | 3-port EtherCAT Junction module, 24 VDC power supply |
| GX-JC06 | 6-port EtherCAT Junction module, 24 VDC power supply |
| GX-JC06-H | 6-port EtherCAT Junction module, 24 VDC power supply, with node switches |
| HMC-SD492 | 4 GB SD memory card |
| NX-PF0730 | NX I/O power feed unit, 5-24 V DC input, 8 terminals, 10A, screwless push-in connector, 12mm wide |
| NX1W-ADB21 | Sysmac NX1P Analog I/O screwless option board, 2 x analog inputs 0 to 10 V, resolution 1/4000 or 0 to 20 mA, resolution 1:2000 |
| NX1W-CIF01 | Sysmac NX1P RS-232C screwless (15 m max.) serial communication option board |
| NX1W-CIF11 | Sysmac NX1P RS422/485 screwless (50 m max.) serial communication option board |
| NX1W-CIF12 | Sysmac NX1P RS422/485 screwless (isolated 500 m max.) serial communication option board |
| NX1W-DAB21V | Sysmac NX1P Analog I/O screwless option board, 2 x analog outputs 0 to 10 V, resolution 1:4000 |
| NX1W-MAB221 | Sysmac NX1P Analog I/O screwless option board, 2 x analog inputs 0 to 10 V, resolution 1:4000 or 0 to 20 mA, resolution 1:2000, 2 x analog outputs 0 to 10 V, resolution 1:4000 |
| SYSMAC-SE201L | Sysmac Studio license only, single user (requires SYSMAC-SE200D download or installation DVD, available separately) |
| W4S1-05D | 5-port enhanced Ethernet switch |
| XS6W-6LSZH8SS100CM-Y | Ethernet patch cable, F/UTP, Cat.6A, LSZH (Yellow), 1 m |
| CJ1W-BAT01 | Battery for CJ1M PLCs | |
| NX-END02 | Spare part - End plate for NX1P controller |
CONTACT US AT ANY TIME
