Home
>
Products
>
PLC Industrial Automation
>
| Detection head size | M12 |
|---|---|
| type | Cylindrical (with screw), shielded type |
| Power supply type | DC 3-wire system |
| Detection distance | 2mm ±10% |
| Set distance | 0–1.6 mm |
| Difference | Less than 10% of the detection distance |
| Detectable objects | Magnetic metals (detection distance decreases with non-magnetic metals) |
| Standard detection object | Iron 12 x 12 x 1 mm |
| Response frequency | 1500Hz |
| Power supply voltage | DC 10-30V, including 10% ripple (pp), Class 2 |
| Current consumption | 16mA or less |
| Control output (output format) | NPN open collector |
| Control output (switching capacity) | 200mA or less |
| Control output (residual voltage) | 2V or less (with a load current of 200mA and a cord length of 2m) |
| indicator light | Standard I/O mode (SIO mode): Operation indicator light (orange/on), communication indicator light (green/off) |
| Operating mode | NO |
| protection circuit | Load short circuit protection, output reverse connection protection, power supply reverse connection protection, surge absorption. |
| Operating temperature range | -40 to 85°C (but no freezing or condensation) |
| Storage temperature range | -40 to 85°C (but no freezing or condensation) |
| Operating humidity range | 35-95% RH (but no condensation) |
| Storage humidity range | 35-95% RH (but no condensation) |
| Temperature effect | Within a temperature range of -40 to +85°C, detection distance within ±15% of the detection distance at 23°C. Within a temperature range of -25 to +70°C, detection distance within ±10% of the detection distance at 23°C. |
| Voltage effects | Within ±15% of the rated power supply voltage, and within ±1% of the detection distance at the rated power supply voltage. |
| Insulation resistance | Resistance between charging unit and case: 50MΩ or more (at DC500V megohm) |
| Withstand voltage | Charging unit and case connection: AC1000V 50/60Hz 1min |
| Vibration resistance | Endurance: 10~55Hz double amplitude 1.5mm 2h in each direction of X, Y, Z |
| Shockproof | Endurance: 1000m/s 2 10 times each in X, Y, and Z directions |
| protective structure | IEC: IP67 IP69K (ISO 20653 standard (old DIN standard 40050 PART9)) |
| Connection method | M12 connector type |
| mass | Packaging weight: Approximately 55g |
| Material | Case: Brass, nickel plated; Detection surface: Polybutylene terephthalate (PBT); Tightening nut: Brass, nickel plated; Toothed washer: Iron, zinc plated; Cord: Polyvinyl chloride (PVC) |
| accessories | Instruction manual, tightening nut, toothed washer |
![]()
![]()
![]()
![]()
CONTACT US AT ANY TIME